Actisense NMEA2000 4 Way Drop Block - A2K-4WD
Actisense NMEA2000 4 Way Drop Block - A2K-4WD
The Actisense 4-way drop makes it easier to reach up to four devices with a single cable.
Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or moving the backbone closer to your devices.
The 4-way drop makes it possible to shorten the length of each cable needed before reaching a T-piece.
Electrical
Rated Current 3 A
Rated Voltage 60 V (AC/DC)
Rated Voltage 2 * 120 Ω 5% 250mW
Mechanical
Female Contact Phosphor bronze, gold plated
Contact Carrier PBT, black
Contact Polarisation Standard M12 - "A" - polarisation
Mating Thread M12
Screw Cap Brass, nickel plated
O-Ring Seal Rubber, black
Housing TPU (Halogen Free) over Epoxy filled PBT housing
Flammability rating UL94 V-0
Internal Housing Shield Coper foil
Cable Jacket Material 0.8mm Nom. PVC, orange
Cable Outer Diameter 6.8mm
Cable Length 3m
Wire Length 140mm (mm stripped)
Wire Jacket PVC
Wires 16 AWG (stripped and tinned)
Drain 18 AWG (34 strand tinned copper)
Cable Shield Al-mylar
Weight 410g
Approvals and Certifications
NMEA 2000®Approved
RoHS Compliant