SUMMER SHUTDOWN 2017

Every Year we close our doors for two weeks to give our staff a well earned rest. This year the office will be closed from 4th August 2017 to 21th August 2017.

The Website will remain open and operational, however orders, and enquiries, will NOT be processed unit our return on the 21th. Please allow for this delay when ordering.

Thank you for understanding and we wish you all a pleasent summer with lots of sailing. The Team @ NMEAShop

Actisense NGW-1-AIS NMEA0183 to NMEA2000 Gateway for AIS

Actisense NGW-1-AIS NMEA0183 to NMEA2000 Gateway for AIS
Brand: Actisense
Product Code: NGW-1-AIS
Reward Points: 0
Availability: In Stock
Recommended Price Inc VAT: £136.14
Our Price Ex-VAT: £99.17
   - OR -   

Actisense NMEA0183 to NMEA2000 Gateway for AIS - NGW-1-AIS

 

The Actisense® NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.

PRE CONFIGURED FOR AIS

Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.

The NGW-1 allows current NMEA 0183 equipment to be kept, or allows the latest NMEA 2000 equipment to be incorporated into the NMEA 0183 system. Once the single cable NMEA 2000 bus system has been installed, data from any node on the bus can be listened to by any other, including any NMEA 0183 instruments connected using an NGW-1.

The new Actisense NMEA Reader software utility can now be downloaded from this page. This utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 device directly, or via an Actisense USG-1.

The NMEA 2000 network acts like a bi-directional multiplexer, allowing all data sources to talk and listen to each other.

The NGW-1 is available in two configurations:

  • NGW-1-AIS: Pre-configured to connect NMEA0183 AIS to NMEA2000 Standard - Opto-isolated input, and ISO-Drive output for direct NMEA 0183 device bi-directional connection.

    The very latest Actisense® ISO-Drive technology has been used in the NGW-1 to separate the output from ground. Electrical spike protection is provided as standard on the NGW-1's input using full galvanic Opto-isolation to provide superior protection to the NMEA source device. Thus full isolation is maintained between the NMEA 0183 input and output and the NMEA 2000 CAN bus connections.
     

Simple to use, the NGW-1 is provided with all required cabling, and also incorporates screw terminal connectors within the case to allow customer specific wiring to be used (if required).
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By OpenCart
NMEAShop.co.uk © 2017