SUMMER SHUTDOWN 2017

Every Year we close our doors for two weeks to give our staff a well earned rest. This year the office will be closed from 4th August 2017 to 21th August 2017.

The Website will remain open and operational, however orders, and enquiries, will NOT be processed unit our return on the 21th. Please allow for this delay when ordering.

Thank you for understanding and we wish you all a pleasent summer with lots of sailing. The Team @ NMEAShop

Actisense NDC-4-USBAIS NMEA AIS Multipler with USB

Actisense NDC-4-USBAIS NMEA AIS Multipler with USB
Brand: Actisense
Product Code: NDC-4-USBAIS
Reward Points: 0
Availability: In Stock
Recommended Price Inc VAT: £240.36
Our Price Ex-VAT: £173.33
   - OR -   

Actisense NMEA AIS Multiplexer with USB - NDC-4-USB-AIS

 

This Actisense® NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.

Flexible multiplexing, preconfigured for AIS operation.

This approach offers these major advantages:

  • Completely removes the need for isolated power supplies - as the NDC-4 creates a full 2500v isolation barrier between it's inputs and each of it's ISO-Drive outputs
  • Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
  • Any problematic or unwanted NMEA sentences can be filtered out / blocked, to help intelligently reduce the NMEA data to a manageable amount and prevent data loops
  • Each NMEA input device is Opto-isolated from all other NMEA device in the system
  • Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data

The NDC-4 has two ISO-Drive outputs which are fully compatible with all standards: NMEA 0183 (RS422), RS485 and PC RS232 ports.

This NDC-4-USB model has an additional USB bi-directional port that allows a copy of the data on the second ISO-Drive output to be sent to a virtual serial port on a PC, while also receiving data (waypoint data for example) from the PC through the same virtual port. This option disables the opto input reserved for the PC connection, reducing the number of inputs the NDC-4-USB has to 4.

Electrical spike protection is provided as standard on all four input channels using opto-isolators. This protects any connected equipment from most system faults; a particularly valuable benefit as equipment requiring the most data, such as a PC or chart plotter, is often the most expensive to repair or replace.

The NDC-4 Data Multiplexer contains intelligent software that manages the multiplexing operation, allowing every input to have a chance of its data reaching the combined NMEA output. Tested up to and beyond a combined 400% loading of the four inputs.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By OpenCart
NMEAShop.co.uk © 2017